Application Examples:

Pnuematic Actuation-
Pressure or Vacuum


Click to enlarge

Fitted with a hose barb in place of the damping adjustment screw, the Airpot is capable of acting as a pneumatic actuator, providing smooth precise positioning.

In high speed filament winders (as shown above), Airpot actuators are part of a force control system to maintain proper filament tension. The ultra-low friction Airpots provide precise, hysteresis-free force control in response to small pressure or vacuum changes directed by the controller.

In automatic assembly and semi-conductor equipment, it smoothly dispenses and positions parts.

Airpot Actuators

The Airpot Actuator is an instrument class pneumatic pressure or vacuum operated device designed to provide ultra-low friction and exceedingly long life with the least amount of mass and contamination. It is particularly well suited for applications requiring the most sensitive response possible from an air cylinder


NOTE: ALL UNITS ARE SINGLE ACTING (MAY BE PRESSURIZED ONLY IN THE EXTENSION DIRECTION) BUT VACUUM MAY BE USED FOR RETRACTION
COMPARE: STOCK VS. CUSTOM

MODEL BORE MAX FORCE @MAX PRESSURE MAX FORCE WITH VACUUM
2K56P .220 in 4.75 lb 125 PSI .55 LB
2K95P .366 in 10.5 lb 100 PSI 1.54 LB
2K160P .627 in 30.8 lb 100 PSI 4.50 LB
2K240P .945 in 70.1 lb 100 PSI 10.30 LB
2K325P 1.281 in 128.8 lb 100 PSI 18.93 LB
2K444P 1.750 in 240.1 lb 100 PSI 35.35 LB

CLICK (above) will Show Basic Model, Mounting Options, Dimensions, and Specs

Click here to see Specifications Summary Chart for all Airpot Actuators

WHY USE THEM?

APPLY A PRECISE FORCE
• Provide a precise, repeatable motive or
counterbalancing force
• Apply a gentle or precise
holding or squeezing force (as low as a few grams)

ACTUATION WITH UNIFORM MOTION
• Move something slowly and smoothly-even over distances less than 0.1 inch
• Cycle at very high speeds- up to 100 cps

ADDITIONAL CAPABILITIES
• Can act as a low-differential pressure sensor
• Can provide a visible indicator of pressure change
• Can be used as a pump in certain applications
• Connecting rod can move through large angles
• Offers lowest possible mass

MAIN FEATURES:
• They will respond to as little as 0.2 psi pressure or vacuum
• They are unaffected by temperature extremes from –55 C to + 150 C
• They use no lubricants and run clean
• They have ultra low hysteresis
• They will not deteriorate, stick, or change properties from any duration of non-use

top - back

Airpot Corporation - 35 Lois Street - Norwalk, CT 06851
Phone (800) 848-7681 Fax (203) 849-0539 Email
service@airpot.com

Rev 12.10.03 mb