Click on a model to view its data sheet, select desired options, or obtain a CAD File.
|
|
BORE (inches)
|
.22 |
.366 |
.627 |
.945 |
1.281 |
1.75 |
|
STROKES AVAILABLE - STOCK UNITS (inches)
|
.5,1.0, 1.5,2.0 |
.5,1.0, 1.5,2.0 |
.5,1.0, 1.5,2.0,3.0 |
.5,1.0, 2.0,3.0 |
.5,1.0, 2.0,3.0 |
.5,1.0, 2.0,3.0 |
|
STROKE RANGE - CUSTOM UNITS (inches) (any x.xxx)
|
.125-11.0 |
.125-11.0 |
.125-13.0 |
.125-12.0 |
.125-10.0 |
.125-8.0 |
|
FIXED STROKE FOR SNUBBER MODELS (inches)
|
N/A |
N/A |
1.5 |
2 |
2 |
2 |
|
FORCE CAPACITY GUIDELINES**
|
|
|
PULL DAMPING DIRECTION
lbs force
(Starting from fully retracted position)
|
.5 |
1.4 |
4 |
9 |
17 |
30 |
|
PUSH DAMPING DIRECTION
lbs force
(Starting from fully extended position)
|
.35 |
1 |
3 |
7 |
13 |
24 |
| **Note: Best performance for each model will be achieved at or below input forces shown above. Maximum force capability is higher and is based on % of available volume displaced. |
|
APPROXIMATE ENERGY CAPACITY AT REFERENCE STROKES
|
|
|
STROKE
|
1in / 3in |
1in / 3in |
1in / 3in |
1in / 3in |
1in / 3in |
1in / 3in |
PULL DAMPING DIRECTION
(inch-lbs)
|
.22 / .75 |
.64 / 2.2 |
1.8 / 6.1 |
4.1 / 14 |
7.5 / 26 |
14 / 48 |
PUSH DAMPING DIRECTION
(inch-lbs)
|
.28 / 1.5 |
.80 / 4.2 |
2.2 / 12 |
5.2 / 27 |
9.5 / 50 |
18 / 93 |
SNUBBER MODELS TO STANDARD STROKE
(ft-lbs) |
N/A |
N/A |
0-.3 |
0-.75 |
0-3 |
0-7 |
|
DAMPING COEFFICIENT RANGE
|
|
FORCE/VELOCITY:
lbs/(in/sec) |
0-.5 |
0-2 |
0-5 |
0-30 |
0-40 |
0-40 |
| NOTE: Higher damping rates available. Please consult an Airpot applications engineer. engineering@airpot.com or (800) 848-7681 |
|
|
| FRICTION COEFFICIENT |
.2 |
.2 |
.2 |
.2 |
.2 |
.2 |
PISTON FRICTION
(without side load) :grams |
<1 |
<1 |
<1 |
<1 |
<4 |
<8 |
| OPERATING TEMPERATURE RANGE* |
-55°C to +150°C |
-55°C to +150°C |
-55°C to +150°C |
-55°C to +150°C |
-55°C to +150°C |
-55°C to +150°C |
| *NOTE: If operating at temperatures over 70 degrees C (158 degrees F) please advise factory |
|
|
Fixed mass in grams
(cylinder, bottom, etc.) = (C1 x Stroke) + C2 |
C1 |
1.2 |
2.9 |
6.1 |
11.5 |
17.5 |
25.7 |
| C2 |
6.4 |
8.9 |
13.6 |
40.6 |
60.3 |
82.1 |
Movable mass in grams
(piston and rod) = (C3 x Stroke) + C4 |
C3 |
.2 |
.4 |
.4 |
1.3 |
6.3 |
6.3 |
| C4 |
1.4 |
2.8 |
4.3 |
8.3 |
13.6 |
31.6 |
|
|
Click to see uses for dashpots. |
| top - back |
Airpot Corporation - 35 Lois Street - Norwalk, CT 06851
Phone (800) 848-7681 Fax (203) 849-0539 Email service@airpot.com
Rev 6/30/08 LRS |
|
