Double-Acting
Metric model Airpel Anti-Stiction Air Cylinders are available as double acting units. The cylinder rods can be extended and retracted with air pressure or vacuum. The Airpel Cylinder has a pressure range of full vacuum to .7 MPa. Available bore sizes range from 9.3mm to 32.5mm. Airpel Metric Cylinders offer highly accurate force and actuation control.
| MODEL |
|
|
|
|
|---|---|---|---|---|
| BORE (mm) | 9.3 | 15.9 | 24 | 32.5 |
| PISTON AREA (sq. mm) | 67.7 | 198 | 452.5 | 830 |
| MAX PRESSURE: (MPa) | 0.7 | 0.7 | 0.7 | 0.7 |
| SUITABLE FOR VACUUM ACTUATION? | Yes | Yes | Yes | No |
| FORCE OUTPUT AT MAX PRESSURE ON REAR SIDE (Newtons) | 47.4 | 139 | 316.6 | 581 |
| FORCE OUTPUT AT MAX PRESSURE ON ROD SIDE (Newtons) | 42 | 125 | 294.5 | 526 |
| Force factor Rear Side (factor x pressure(MPa)= force output (N)) | 67.7 | 198 | 452.5 | 830 |
| Force factor Rod Side (factor x pressure(MPa)= force output (N)) | 60 | 178 | 420.8 | 751 |
| MIN PRESSURE DIFFERENTIAL REQD FOR ACTUATION (MPa) | < 0.0035 | < 0.0035 | < 0.0035 | < 0.0035 |
| PISTON FRICTION (without side load) AS % OF LOAD | 1%-2% | 1%-2% | 1%-2% | 1%-2% |
OPERATING TEMPERATURE RANGE: STANDARD CONFIGURATION EXTREME TEMPERATURE |
-20 °C to +100 °C -40 °C to +150 °C |
-20 °C to +100 °C -40 °C to +150 °C |
-20 °C to +100 °C -40 °C to +150 °C |
-20 °C to +100 °C -40 °C to +150 °C |
| PISTON/ROD ASSY WEIGHT(grams): Single rod end models Double rod end models |
4.5+(0.053 x STROKE) 8.87+(0.13 x STROKE) |
16+(0.142 x STROKE) 28.48+(0.315 x STROKE) |
41.4+(0.254 x STROKE) 74.28+(.509 x STROKE) |
82.6+(0.56 x STROKE) |
| WEIGHT OF COMPLETE UNIT (grams): Single rod end models Double rod end models |
31.7+(0.375 x STROKE) 41.02+(0.462x STROKE) |
64.6+(0.622 x STROKE) 80.45+(0.854 x STROKE) |
157.18+(1.225 x STROKE) 204.9+(1.480 x STROKE) |
616+(3.66 x STROKE) |
| MAX LEAK RATE at 0.34 MPa- by Piston: SL / min | 1.16 | 1.39 | 2.2 | 2.2 |
| MAX LEAK RATE at 0.34 MPa- by Rod: SL / min | 2.2 | 2.6 | 2.6 | 2 |
*NOTE: Lower leak rates are available upon request. Please consult an Airpot applications engineer by calling 203-846-2021 or by Emailing engineering@airpot.com
